manualshive.com logo in svg

Panasonic DP-2000, Operating Instructions Manual

Share
Download
Panasonic DP-2000 Operating Instructions Manual Download Page 38

Installation and Configuration (Windows NT 4.0)

38

■

Scheduling Tab

Available

Schedules the printer for operation. Specify operating hours when From-To is selected.

Priority

Sets printing priority. The slider allows the priority to be adjusted from 1 through 99.

Spool print documents... / Print directly to the printer

Specify how documents should be sent from the application to the printer.

Hold mismatched documents

The spooler compares document settings against printer settings and holds printing of a document if its

settings (Paper Size, Orientation, and so on) do not match the printer settings.

Print spooled documents first

Always prints spooled documents first regardless of printing priority.

Keep documents after they have printed

Holds documents in the print queue even after they have been printed. These documents can be printed

again directly from the queue regardless of the state the application is in.

Summary of Contents for DP-2000





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands