Reference
TQBS0165
61
The images do not appear on the TV.
The picture is distorted during play, or video
is not played correctly.
• Check the connections. (
>
9)
• Check the settings of the connected TV, etc.
• An incorrect resolution is selected in “Video
Format”. (
>
56) Reset the setting as follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button at the
same time for more than 5 seconds.
• “00 RET” is displayed on the front panel
display.
2 Repeatedly press [
1
] (right) until “04 PRG”
is displayed on the front panel display.
3 Press and hold [OK] for at least 3 seconds.
Set the item again.
• The picture may be distorted or a black screen
may appear between scenes recorded with
different aspect ratios.
3D video is not output correctly.
• 3D video may be output correctly by changing
the following setting:
- “Signal Format” (
>
32, 3D settings during
playback)
• Check the settings of the connected TV.
• When a non-3D compatible amplifier/receiver is
connected between this unit and a TV, 3D video
is not output. (
>
10)
• When “Audio Output” is set to “Off”, 3D video
may not be output correctly. (
>
56)
No sound.
Distorted sound.
• Check the connections. (
>
9)
• Check the settings of the connected TV, etc.
• Press [AUDIO] to select the audio. (
>
15, 31)
• To output audio from a device connected with an
HDMI cable, set “Audio Output” to “On”. (
>
56)
Cannot change audio channel.
• You cannot change the audio channel if “Digital
Audio Output” is set to “Bitstream”. (
>
55)
Cannot record.
Cannot copy.
• Some broadcasts are copyright protected.
Timer recording does not work properly.
• When
is displayed on the screen. (
>
22)
Auto Renewal Recording does not work
properly.
• The programme will not be overwritten in the
following cases:
- the programme is protected
- any programme is being played back or copied
- a screen such as Video Menu is displayed
Instead, the programme will be saved as a
separate programme and that will be overwritten.
A part or whole of a recorded programme has
been lost.
• If there is a power failure or the AC mains lead is
disconnected from the household mains socket
while recording or editing, the programme may
be lost or the HDD may become unusable. We
cannot offer any guarantee regarding lost
programmes.
Keyword Recording does not work properly.
• The unit may not record a Keyword Recording
programme when part of its broadcast time
overlaps with that of another timer recording
programme. When this occurs, the Keyword
Recording does not start even after the timer
recording has finished.
• The unit cannot run a search correctly if Search
Conditions are not appropriate. Revise the
Search Conditions. (
>
24)
Sound
Recording, timer recording and
copying
DMR-HST270GZ_eng.book 61 ページ ２０１７年１２月２６日 火曜日 午後５時４７分
