Copying vide
o
TQBS0165
38
Copying programmes
The unit can copy programmes between the HDD
and USB-HDDs.
To register the external HDD (USB HDD)
(
>
26)
To copy video files (
>
39)
1
Select “No”, then press [OK] in step 6 (
>
left).
2
Select the programme, then press the yellow
button.
Repeat this step to select programmes.
3
Press the blue button.
4
Go to step 6 (
>
left).
About screen icons on the Video Menu
Refer to “Screen icons”. (
>
27)
§
§
“For recorded programmes (
>
66)” only
• The programme in the source media will be
deleted.
1
Connect the USB HDD.
2
Press [FUNCTION MENU].
3
Select “Recorded Programmes” in
“Contents on HDD”, then press [OK].
4
Select the programme.
• Multiple selection
Select the programme, then press the
yellow button.
A check mark
is displayed. Repeat this
step.
• Press the yellow button again to cancel.
5
Press the blue button.
6
Select “Yes”, then press [OK].
• If you select “No”, you can change the
selection. (
>
right, To change the
selection)
7
Set other settings, then press [OK].
(
>
right, “Setting the copying options”)
8
Select “Yes”, then press [OK].
Copying video
To change the selection
Setting the copying options
1
Select the item in step 7 (
>
left).
2
Press [
2
,
1
] to change the settings.
• Automatic Standby after Copy
On:
This unit is turned to standby mode when it is
not operated for approximately 5 minutes
after completing copy.
DMR-HST270GZ_eng.book 38 ページ ２０１７年１２月２６日 火曜日 午後５時４７分
