Panasonic DMR-HST270 Operating Instructions Manual Download Page 26

Page: 26 / 72

Recording

TQBS0165

Using the external

HDD (USB HDD)

If you intend to move recorded programmes to a
USB HDD, the USB HDD must be registered to
this unit first.

“For recorded programmes (

66)” only

Limitation information

• Registering of a USB HDD will format the

USB HDD and all the content already recorded
will be deleted.

• Up to eight USB HDDs can be registered on this

unit.

• Registered USB HDDs cannot be used with

devices other than this unit.

• Certain non-recommended USB HDDs cannot

be used with this unit.

• If a problem occurs with the USB HDD, please

contact the manufacturer of the device.

Connect this unit with optional USB HDD.

• Only one USB HDD can be connected.
• The USB HDD can be connected to the USB

port on the rear of this unit.

• If the registering screen appears when

connecting the USB HDD, go to step 5.

Press [FUNCTION MENU].

Select “Basic Settings” in “Setup”, then press
[OK].

Select “Settings for USB HDD” in “HDD /
USB HDD”, then press [OK].

Select “USB HDD Registration”, then press
[OK].

Select “Yes”, then press [OK].

When the registering is complete, message
screen appears.
Press [OK].

The confirmation screen appears.
Press [OK].

To cancel all USB HDD registrations (

54)

• It is not possible to play back the content on the USB HDD

whose registration has been cancelled.

• You can check the registration number of the USB HDD on

the Video Menu. (

27)

Disconnecting without following this procedure
may result in the loss of recorded content from
the USB HDD or the internal HDD.

Press [FUNCTION MENU].

Select “Basic Settings” in “Setup”, then press
[OK].

Select “Settings for USB HDD” in “HDD /
USB HDD”, then press [OK].

Select “USB HDD Disconnection”, then
press [OK].

Select “Yes”, then press [OK].

Disconnect the USB HDD from this unit.

Regarding the external HDD (USB HDD)

Connecting the USB HDD

This unit’s rear panel

USB HDD

Registering the USB HDD

Disconnecting the USB HDD

DMR-HST270GZ_eng.book 26 ページ２０１７年１２月２６日　火曜日　午後５時４７分

Summary of Contents for DMR-HST270









































































Search results

Summary of Contents for DMR-HST270

Reviews:

Related manuals for DMR-HST270

Brands by name

Popular brands

Panasonic DMR-HST270, Operating Instructions Manual

Search results

Summary of Contents for DMR-HST270

Reviews:

Related manuals for DMR-HST270

Brands by name

Popular brands