Recording
TQBS0165
17
Recording
TV programmes
This unit can record two programmes being
broadcasted at the same time.
To record two programmes simultaneously
While recording, perform steps 1–3. (
>
above)
To delete recorded programmes (
>
35)
• If a timer recording reaches its start time when all tuners
are being used for recording, the recording (OTR) of one of
the programmes terminates.
• Copying cannot be performed while recording.
• Teletext will not be recorded.
• When “Automatic Standby after OTR” is set to “On”, refer to
page 58.
• Following contents or media cannot be played back while
recording.
- Video file
- Photo
- USB HDD (For data files,
>
66) and USB memory
1 Select “Recording Time” or “Continuous
recording” in step 3 (
>
left).
Recording Time:
You can set the length of recording time from
30 minutes to 4 hours.
• You can select the recording time with [
2
,
1
].
2 Press [OK].
This unit can record programmes in DR mode and
then automatically change their recording mode
(picture quality) to another setting while in
standby mode.
• The picture quality for satellite broadcasts is SD.
(As of December 2017) Since the DR mode can
record broadcasts while maintaining their
original picture quality, we recommend
recording in DR mode.
1 Press [OPTION].
2 Select “Recording Mode”.
3 Select the recording mode (picture quality),
then press [OK].
• Recording mode (Picture Quality) (
>
66)
• The recording mode set here is used as the
default value for the next recording.
To check to see if the recording mode change
is finished (
>
37)
To cancel the recording mode change (
>
37)
• Programmes in the original picture quality (DR mode) will
be deleted after their recording mode is changed.
• When the HDD does not have enough remaining space, the
recording mode change function does not operate.
• It takes about the same amount of time as recording to
change the recording mode.
• A recording mode change stops when this unit is turned on.
The process will start from the beginning again after the unit
is switched to standby mode.
• Even if you change the recording mode of a programme, its
audio, subtitle and Audio Description settings will remain
the same as those at the start of recording.
The programmes can only be recorded to
built-in HDD and cannot be copied from
built-in HDD to the media other than USB HDD.
1
Select the channel to record.
2
Press [REC
¥
].
Recording will start.
3
Select “Automatic Stop”, then press [OK].
• One touch recording (OTR)
Recording stops automatically when the
programme ends.
Recording
Automatic Stop (Guide Link) at XXXXXX
REC1/OTR
Recording Time
Continuous recording
30 min
XXXXXX - XXXXXX
To set the recording time
To change the recording mode (picture
quality)
DMR-HST270GZ_eng.book 17 ページ ２０１７年１２月２６日 火曜日 午後５時４７分
