Getting started
SQT0801
15
• While writing to/reading from the media, do not switch the
unit to standby mode or remove the media. Such action
may result in loss of the media contents.
• When inserting the media, ensure that it is facing the right
way up.
Main unit
1
Recording indicator
• The indicator will light up while recording.
• The indicator will blink while recording is
paused and before recording starts.
2
Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and
right
• Distance: Within approx. 7 m in front of the
unit
3
Open/close disc tray
4
Standby/on switch (
Í
/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
5
Disc tray
6
USB port
7
SD card slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
Pull to flip down
the front panel.
Display
SD card
USB memory
Disc
Display
1 Main display section indicator
- Current time
- Playback counter
- Various messages (
>
106), etc.
2 SD card slot indicator
3 Copying indicator
4 Disc indicator
5 Drive (HDD, BD or SD) indicator
6 Remote control signal indicator
7 Playback indicator
8 USB port indicator
9 Timer recording indicator
This indicator lights up when the timer
recording standby or Keyword Recording
standby is activated.
PLAY
COPY
SD USB
HDDSD
BD
2
3
4
5 6
1
7 8
9
DMRBWT955GL_eng.book 15 ページ ２０１５年２月３日 火曜日 午前１０時３分
