Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Page: 81 / 189

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 81
4) Press
as
to select [SCREEN POSITION].
f
[SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
5) Press
qw
to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press
as
to select [AUTO SIGNAL].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] Sets the auto signal function to off.
[ON]
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
[AUTO SETUP]
Set this when adjusting a special signal or horizontally long (such as 16:9) signal.
Setting with [MODE]
1) Press
as
to select [AUTO SETUP].
2) Press the <ENTER> button.
f
The [AUTO SETUP] screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
[DEFAULT] Standard setting.
[WIDE]
Select this item when an image aspect ratio is a wide-screen signal, which does not meet the
[DEFAULT] setting.
[USER] Select this when receiving a signal with a special horizontal resolution (number of display dots).
f
Proceed to Step 7) when [DEFAULT] or [WIDE] is selected.
f
Proceed to Step 5) when [USER] is selected.
5) Press
as
to select [DISPLAY DOTS], and press
qw
to match [DISPLAY DOTS] to the horizontal
resolution of the signal source.
6) Press
as
to select [MODE].
7) Press the <ENTER> button.
f
Automatic adjustment is executed. [PROGRESS] is displayed while in automatic adjustment. When
completed, the screen returns to the [AUTO SETUP] screen.
Note
f
Automatic setup of signal can be executed when analog RGB signal consisting of dots such as computer signal, or HDMI signal is being
input.
Adjusting position automatically
1) Press
as
to select [AUTO SETUP].
2) Press the <ENTER> button.
f
The [AUTO SETUP] screen is displayed.
3) Press
as
to select [POSITION ADJUST].
4) Press
qw
to switch the item.