Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Page: 50 / 189

Chapter 3 Basic Operations — Projecting
50 - ENGLISH
4) Turn the lens shift lever clockwise to fix.
5) Adjust the zoom and the focus. (Fig. 2)
f
Adjust the size of the projected image by turning the zoom ring.
f
Adjust the focus by turning the focus ring.
Note
f
It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.
f
Since the projected image size will change when the focus ring is turned, fine adjust the projected image size again by turning the zoom
ring.
f
Perform the [POSITION] menu → [SCREEN ADJUSTMENT] when the projected image is distorted.
Adjusting adjustable feet
Install the projector on a flat surface so that the front of the projector is parallel to the screen surface and the
projection screen is rectangular.
If the screen is tilted downward, extend the front adjustable feet so that the projected image becomes rectangular.
The adjustable feet can also be used to adjust the projector to be level when it is tilted in the horizontal direction.
Adjustable feet can be extended by turning them as shown in the figure. Turning them in the opposite direction will
return them to the original position.
Maximum adjustable range
Adjustable feet: 35 mm (1-3/8") each
Attention
f
Be careful not to block the intake/exhaust vents with your hands or any objects when adjusting the adjustable feet while the light source is
on. (
x
page 25)
Adjustment range by the lens position shift (optical shift)
Based on the standard projection position using the optical axis shift function, the projection position can be
adjusted in the range shown in the following figure.
Following figure shows the adjustment range when the projector is installed on the floor.
Projected image width H
Standard projection position
Projected image height V
0.27 H 0.34 H
0.44 V
0.64 V
Note
f
Optimal image can be achieved by installing the projector squarely in front of the screen and adjusting the lens shift lever to center.