Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Page: 126 / 189

Chapter 4 Settings — [NETWORK] menu
126 - ENGLISH
Note
f
When [COMMAND PROTECT] is set to [DISABLE], connection authentication is not performed, making it vulnerable to threats on the
network. Be aware of the risks before making settings.
f
For details on how to use the command control function, refer to "Control commands via LAN". (
x
page 172)
[NETWORK CONTROL]
Set the network control of this projector.
Setting the password of the administrator account (
x
page 123) is required for using the network function of the
projector.
1) Press
as
to select [NETWORK CONTROL].
2) Press the <ENTER> button.
f
The [NETWORK CONTROL] screen is displayed.
3) Press
as
to select an item, and press
qw
to change the setting.
[WEB CONTROL] Set to [ON] to control with the web browser.
[COMMAND CONTROL]
Set to [ON] to control with the control command format (
x
page 177) for the <SERIAL IN> terminal.
Refer to “Control commands via LAN” (
x
page 172).
[COMMAND PORT] Set the port number used for command control.
[Crestron Connected(TM)]
Set to [ON] to control with Crestron Connected of Crestron Electronics, Inc.
[AMX D.D.]
Set to [ON] to control with the controller of AMX Corporation.
Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, visit the
website of AMX Corporation.
URL http://www.amx.com/
4) Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
5) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
[PJLink]
Set the PJLink function to control and monitor the projector using the PJLink protocol.
Setting the password of the administrator account (
x
page 123) is required for using the PJLink function of the
projector.
Note
f
If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
[PJLink PASSWORD]
Set the password for security authentication which is required when connecting to the projector.
1) Press
as
to select [PJLink].
2) Press the <ENTER> button.
f
The [PJLink] screen is displayed.
3) Press
as
to select [PJLink PASSWORD], and press the <ENTER> button.
f
The [PJLink PASSWORD] screen is displayed.
4) Press
as
to select [PASSWORD] under [CURRENT], and press the <ENTER> button.
f
The [PASSWORD] screen is displayed.
5) Press
asqw
to select a character, and press the <ENTER> button.
f
Enter the current password.
f
The factory default setting of password is blank.
6) After entering the password, press
asqw
to select [OK], and press the <ENTER> button.