Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Page: 111 / 189

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 111
7) Press the <ENTER> button.
f
The HDMI-CEC operation screen is displayed.
8) Select the item displayed on the HDMI-CEC operation screen to operate the device.
f
Refer to the “Using HDMI-CEC function” (
x
page 152) for the operation details.
Note
f
If no CEC-compatible device is connected to <HDMI 1 IN> or <HDMI 2 IN> terminal, there is no device displayed at [HDMI 1] or [HDMI 2]
and [----] is displayed.
f
The operation menu of CEC-compatible devices disappears when you press the <RETURN> button or <MENU> button.
Changing the menu code
The menu code that calls up the operation menu of the CEC-compatible device varies depending on the device
manufacturer. If you cannot call up the operation menu of a CEC-compatible device from the HDMI-CEC operation
screen, change the menu code setting.
1) Press
as
to select [HDMI CEC].
2) Press
qw
to select [ON].
3) Press the <ENTER> button.
f
The [HDMI CEC] screen is displayed.
4) Press
as
to select [MENU CODE].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
f
Select the menu code from [1] to [6].
Setting the link control
Make settings for the link control between the projector and CEC-compatible devices.
[PROJECTOR -> DEVICE]
Set the link control from the projector to the CEC-compatible device.
1) Press
as
to select [HDMI CEC].
2) Press
qw
to select [ON].
3) Press the <ENTER> button.
f
The [HDMI CEC] screen is displayed.
4) Press
as
to select [PROJECTOR
->
DEVICE].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DISABLE]
Disables the link control from the projector to the CEC-compatible device.
Select this when you do not want the power status of the CEC-compatible device to link with the power status
of the projector .
[POWER OFF]
Enables power-off link control.
When you turn off the power of the projector and put it in standby mode, all CEC-compatible devices connected
to the <HDMI 1 IN> terminal or <HDMI 2 IN> terminal will enter standby mode.
Power-on link control is disabled.
[POWER ON/OFF]
Enables power-on link control and power-off link control.
If you turn on the projector and start projection with the HDMI1 input or HDMI2 input selected, the CEC-
compatible device connected to the selected input will turn on.
When you turn off the projector and put it in standby mode, all CEC-compatible devices connected to the
<HDMI 1 IN> terminal or <HDMI 2 IN> terminal will enter standby mode.
[DEVICE -> PROJECTOR]
Set the link control from the CEC-compatible device to the projector.
1) Press
as
to select [HDMI CEC].
2) Press
qw
to select [ON].