Panasonic DLP PT-FRZ60 Operating Instructions (Functional Manual) Download Page 160

Page: 160 / 189

Chapter 6

Maintenance — Light source/temperature indicators

160 - ENGLISH

Light source/temperature indicators

When an indicator lights up

If a problem occurs inside the projector, the light source indicator <LIGHT> or the temperature indicator <TEMP>

will inform you by lighting or blinking. Check the status of the indicators and take following measures.

Attention

When switching off the projector to deal with problems, make sure to follow the procedure in “Switching off the projector” (

page 46).

Light source indicator <LIGHT>

Temperature indicator <TEMP>

Light source indicator <LIGHT>

Indicator status

Lighting red

Blinking red

(3 times)

Status

Some of the elements of the light

source are defective and the light

output has decreased.

The light source does not light up, or the light source turns off while the

projector is in use.

Cause

―

Solution

Turn the <MAIN POWER> switch to <OFF> (

page 46), and turn on the power again.

Note

If the light source indicator <LIGHT> continues to light or blink even after the measure is taken, set the <MAIN POWER> switch to <OFF>,

and ask your dealer for repair.

The light source indicator <LIGHT> lights green while the projector is in projection mode if there is no notification by lighting or blinking red.

Summary of Contents for DLP PT-FRZ60






























































































































































































Search results

Summary of Contents for DLP PT-FRZ60

Reviews:

Brands by name

Popular brands

Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Search results

Summary of Contents for DLP PT-FRZ60

Reviews:

Brands by name

Popular brands