Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Page: 33 / 189

Chapter 2 Getting Started — Setting up
ENGLISH - 33
Arc center
Screen
Projection distance
Arc radius
Arc center
Screen
Projection distance
Arc radius
Only [KEYSTONE] used [KEYSTONE] and [CURVED CORRECTION] used together
Only [CURVED CORRECTION]
used
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Vertical
keystone
correction
angle α (°)
Horizontal
keystone
correction
angle β (°)
Min. value of
R2/L2
Min. value of
R3/L3
Min. value of
R2/L2
Min. value of
R3/L3
±40 ±20 ±20 ±15 0.9 1.7 0.5 1.0
Note
f
When [SCREEN ADJUSTMENT] is used, the focus of the entire screen may be lost as correction increases.
f
Make the curved screen a circular arc shape with one part of a perfect circle removed.
Projection distance
A ±5 % error in listed projection distances may occur.
When [SCREEN ADJUSTMENT] is used, distance is corrected to become smaller than the specified image size.
(Unit: m)
Projected image
size
Aspect ratio 16:10 Aspect ratio 16:9 Aspect ratio 4:3
Projection distance
(L) Height
position (H)
Projection distance
(L) Height
position (H)
Projection distance
(L) Height
position (H)
Diagonal (SD)
Min.
(LW)
Max.
(LT)
Min.
(LW)
Max.
(LT)
Min.
(LW)
Max.
(LT)
1.02 (40") 1.22 2.51 -0.08 - 0.51 1.26 2.58 -0.07 - 0.47 1.39 2.85 -0.09 - 0.58
1.27 (50") 1.54 3.15 -0.09 - 0.63 1.59 3.23 -0.09 - 0.59 1.75 3.57 -0.11 - 0.72
1.52 (60") 1.86 3.78 -0.11 - 0.76 1.92 3.89 -0.10 - 0.70 2.12 4.29 -0.13 - 0.86
1.78 (70") 2.18 4.42 -0.13 - 0.89 2.24 4.55 -0.12 - 0.82 2.48 5.01 -0.15 - 1.00
2.03 (80") 2.50 5.06 -0.15 - 1.01 2.57 5.20 -0.14 - 0.94 2.84 5.73 -0.17 - 1.14
2.29 (90") 2.82 5.70 -0.17 - 1.14 2.90 5.86 -0.16 - 1.06 3.20 6.46 -0.19 - 1.29
2.54 (100") 3.14 6.34 -0.19 - 1.27 3.23 6.51 -0.17 - 1.17 3.57 7.18 -0.21 - 1.43
3.05 (120") 3.78 7.61 -0.23 - 1.52 3.89 7.82 -0.21 - 1.41 4.29 8.62 -0.26 - 1.72
3.81 (150") 4.74 9.53 -0.28 - 1.90 4.88 9.79 -0.26 - 1.76 5.38 10.79 -0.32 - 2.15
5.08 (200") 6.34 12.72 -0.38 - 2.53 6.52 13.07 -0.35 - 2.34 7.19 14.40 -0.43 - 2.87
6.35 (250") 7.94 15.91 -0.47 - 3.16 8.16 16.35 -0.44 - 2.93 9.00 18.01 -0.53 - 3.58
7.62 (300") 9.54 19.10 -0.57 - 3.80 9.81 19.63 -0.52 - 3.51 10.81 21.62 -0.64 - 4.30
Formula for calculating the projection distance
To use a projected image size not listed in this manual, check the projected image size SD (m) and use the
respective formula to calculate the value.
The unit of all the formulae is m. (Values obtained by the following calculation formulae contain a slight error.)
When calculating the value using image size designation (value in inches), multiply the value in inches by 0.0254
and substitute it into SD in the formula.
Aspect ratio 16:10 Aspect ratio 16:9 Aspect ratio 4:3
Projected image size
Height (SH)
= SD x 0.530 = SD x 0.490 = SD x 0.6
Projected image size
Width (SW)
= SD x 0.848 = SD x 0.872 = SD x 0.8
Minimum projection distance
(LW)
= 1.2598 x SD - 0.0526 = 1.2949 x SD - 0.0526 = 1.4262 x SD - 0.0526
Maximum projection distance
(LT)
= 2.5118 x SD - 0.0390 = 2.5816 x SD - 0.0390 = 2.8436 x SD - 0.0390