Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Page: 104 / 189

Chapter 4 Settings — [PROJECTOR SETUP] menu
104 - ENGLISH
[COMMAND]
Detailed settings of
[COMMAND]
Description
[INPUT]
[COMPUTER1] Switches the input to COMPUTER1.
[COMPUTER2] *1 Switches the input to COMPUTER2.
[VIDEO] Switches the input to VIDEO.
[HDMI1] Switches the input to HDMI1.
[HDMI2]
Switches the input to HDMI2.
[DIGITAL LINK] Switches the input to DIGITAL LINK.
[INPUT1] - [INPUT10] *2
Switches the input to DIGITAL LINK, and switches the input of the
Panasonic twisted-pair-cable transmitter to the specified input.
[OPERATING MODE]
[NORMAL] Prioritizes luminance.
[ECO]
Controls the power to increase the life of the light source although
the luminance is lower than that of [NORMAL].
[QUIET]
Prioritizes the operation with less noise although the luminance is
lower than that of [NORMAL].
[USER]
Controls the power with the setting set in [USER].
[IN STANDBY
MODE(AUDIO)]
[OFF] Stops the audio output during standby.
[ON]
Outputs the audio during standby.
[VOLUME] [0] - [63] Sets the volume.
*1 The [COMPUTER2] command is disabled when the [DISPLAY OPTION] menu
→
[COMPUTER IN/OUT]
→
[COMPUTER2 SELECT] is set to
[COMPUTER1 OUT].
*2 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input
name is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the input name is selected, it will be disabled.
11) Press the <ENTER> button.
f
The command is fixed and
n
is displayed at the left of the selected command.
f
After the command is fixed, press the <MENU> button to close the detailed setting screen.
12) Press
asqw
to select [STORE], and press the <ENTER> button.
Note
f
To delete a command that has been already set, press the <DEFAULT> button on the remote control while the screen in Step 5) is
displayed, or select [DELETE] at the screen in Step 6) and press the <ENTER> button.
f
If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command
number.
f
The operating time will be the local time. (
x
page 109)
f
If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in
[SCHEDULE] is executed, the command set with the schedule function may not be executed.
[INITIAL STARTUP]
Set the startup method when the <MAIN POWER> switch is set to <ON>.
1) Press
as
to select [INITIAL STARTUP].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[LAST MEMORY] Starts up the projector in the condition before the <MAIN POWER> switch is set to <OFF>.
[STANDBY] Starts up the projector in standby.
[ON] Starts projecting immediately.
[STARTUP INPUT SELECT]
Set the input when the projector is switched on to start projection.
1) Press
as
to select [STARTUP INPUT SELECT].
2) Press the <ENTER> button.
f
The [STARTUP INPUT SELECT] screen is displayed.
3) Press
asqw
to select the input, and press the <ENTER> button.
[LAST USED] Keeps the input selected last.
[COMPUTER1] Sets the input to COMPUTER1.