manualshive.com logo in svg

Panasonic DLP PT-FRZ60, Operating Instructions (Functional Manual)

Share
Download
Panasonic DLP PT-FRZ60 Operating Instructions (Functional Manual) Download Page 166

Chapter 6 

 

Maintenance — [SELF TEST] indications

166 - ENGLISH

Note

 

f

The self-diagnosis display and the details of the malfunction may be different.

 

f

For errors and warnings that are not described in the table, consult your dealer.

 

r

Measure for error and warning

Action 

number

Measure

1

The operating environment temperature is too high. Use the projector in an appropriate operating environment temperature

*1

.

2

The operating environment temperature is too low. Use the projector in an appropriate operating environment temperature

*1

.

3

Battery replacement is required. Consult your dealer.

4

If the display does not clear after switching the main power off and on, consult your dealer.

5

The light source has failed to turn on. If the light source does not light up after turning the power off and on, consult your 

dealer.

*1  The operating environment temperature of the projector differs depending on the altitude or the setting of the [PROJECTOR SETUP] menu 

→

 [ECO 

MANAGEMENT] 

→

 [OPERATING MODE]. Refer to “Operating environment temperature” (

x

 page 183) for details.

Summary of Contents for DLP PT-FRZ60






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands