Panasonic DC-BS1H Operating Instructions Manual Download

Page: 104 / 304

- 104 -

5. Recording settings - Audio Settings

[Sound Rec Level Adj.]

Manually adjust the sound recording level.

Select [Sound Rec Level Adj.].

●

[MENU/SET] [ ] [ ] [Sound Rec Level Adj.]

Press

to adjust the sound recording level and then press [MENU/SET].

●

You can adjust the sound recording level within the range from [MUTE], [–18dB] to [+12dB] in steps of 1 dB.

●

Displayed dB values are approximate.

●

When set to [MUTE], [ ] is displayed in the recording screen.

[Sound Rec Level Limiter]

The sound recording level is adjusted automatically to minimize sound distortion (crackling noise).

[MENU/SET] [ ] [ ] Select [Sound Rec Level Limiter]
Settings: [ON] / [OFF]

[Wind Noise Canceller]

This reduces the wind noise coming into the built-in microphone while maintaining sound quality.

[MENU/SET] [ ] [ ] Select [Wind Noise Canceller]

[HIGH]

This effectively reduces the wind noise by reducing the low-pitched sound when a strong
wind is detected.

[STANDARD]

This reduces wind noise without loss of sound quality by filtering out only wind noise.

[OFF]

―

●

You may not see the full effect depending on the recording conditions.

●

This function works only with the built-in microphone. When an external microphone is connected, [Wind Cut] is
displayed. (

146

Reduction of Wind Noise

)

Summary of Contents for DC-BS1H

















































































































































































































































































































Search results

Summary of Contents for DC-BS1H

Reviews:

Related manuals for DC-BS1H

Brands by name

Popular brands

Panasonic DC-BS1H, Operating Instructions Manual

Search results

Summary of Contents for DC-BS1H

Reviews:

Related manuals for DC-BS1H

Brands by name

Popular brands