- 221 -
- 221 -
12. Remote Operations - Tethered Recording
Tether Connection Mode
You can set the camera to tether connection mode by operating the camera remotely from “LUMIX Tether”.
If you set the camera to tether connection mode when it is not recording, it enters a connection standby state for LUMIX Tether
while maintaining the connection between the camera and PC, and it can quickly return to a state where remote shooting is
possible.
●
The status indicator lights up (orange) during tether connection mode.
●
For how to operate the software, refer to the operation guide for “LUMIX Tether”.
Taking a still picture
You can take still pictures by operating the camera remotely from the operation panel of “LUMIX Tether”.
●
When you are recording still pictures you can use the functions which are not available during video recording.
●
The functions for still pictures are not displayed on the menu screen.
●
The setting items differ from those during video recording.
Example)
Recording mode
[P] / [A] / [S] / [M]
Shutter speed (sec.)
1 to 1/8000
Exposure Compensation
[±5EV]
●
When the exposure compensation value falls below or exceeds ±3 EV, the brightness
of the recording screen will no longer change.
Picture quality
JPEG (FINE / STD.)
Picture size
[L] / [M] / [S]
Image Stabilizer
[Panning]
1 shot AF
Available
●
The following setting is fixed:
– [Aspect Ratio]: [3:2]
●
[P] / [A] / [S] / [M] mode can be used only during Tether recording.
After finishing Tether recording, select [Creative Video Mode] in [Rec Mode].
●
For how to operate the software, refer to the operation guide for “LUMIX Tether”.
