Panasonic DC-BS1H Operating Instructions Manual Download

Page: 264 / 304

- 264 -

14. Materials - Lamp / Indicator Display

Lamp / Indicator Display

Shows the status of the camera with the lamp/indicator.

■

Status indicator (Green / Orange)

Lights up (Green)

The camera is turned on.

Lights up (Orange)

Tether connect mode (

221

Tether Connection Mode

)

Blinks (Green, once/sec.)

●

When using PoE+ power supply.
Determining PoE+. (

Supplying power from a PoE+ power supply

)

●

When using battery.
Low battery (It blinks in orange when in Tether connect mode.)

Blinks (Green, 4 times/sec.)

●

When using PoE+ power supply.
Insufficient power supply capacity

●

When using battery.
The camera is turned off forcibly due to low battery. (It blinks in orange when in
Tether connect mode.)

Blinks (alternately green and

orange)

Turn the camera off and then on again since this indicates a system error.

Off

The camera is turned off.

■

Front tally lamp / Rear tally lamp (Red)

Lights up

During video recording. (or sending data to external devices)

Blinks (Red, once/sec.)

Low battery and card capacity.

Blinks (Red, 4 times/sec.)

Stops recording forcibly due to low battery and card capacity.

■

[NETWORK] connection lamp (Blue)

Lights up

Connected with a LAN cable.
When Wi-Fi/Bluetooth function is ON or connected.

Blinks

When sending Tether recorded images to a PC from a camera.

●

When the power is turned off and [Remote Wakeup] is set to [ON], the [NETWORK] connection lamp turns off even if the
Bluetooth function is working.

Summary of Contents for DC-BS1H

















































































































































































































































































































Search results

Summary of Contents for DC-BS1H

Reviews:

Related manuals for DC-BS1H

Brands by name

Popular brands

Panasonic DC-BS1H, Operating Instructions Manual

Search results

Summary of Contents for DC-BS1H

Reviews:

Related manuals for DC-BS1H

Brands by name

Popular brands