Panasonic DC-BS1H Operating Instructions Manual Download

Page: 146 / 304

- 146 -

8. Connections with External Devices - External Microphones (Optional)

■

Removing the Hot Shoe Cover

Remove the hot shoe cover by pulling it in the direction of arrow while pressing it in the direction of arrow .

Setting the Sound Pickup Range (DMW-MS2: Optional)

When using the Stereo Shotgun Microphone (DMW-MS2: optional), you can set the microphone sound pickup range.

Select [Special Mic.].

●

[MENU/SET] [ ] [ ] [Special Mic.]

[STEREO]

Picks up sound over a wide area.

[LENS AUTO]

Picks up sound from a range automatically set by the lens angle of view.

[SHOTGUN]

Helps prevent picking up background noise, and records sound from a specific direction.

[S.SHOTGUN]

Narrows the sound pickup range more than with [SHOTGUN].

[MANUAL]

Sets the range manually for sound pickup.

(When [MANUAL] is selected)

Press

to adjust the sound pickup range and then press [MENU/SET].

●

You can register the [MANUAL] sound pickup range setting in a Fn button:
[ ] [

] [Fn Button Set] [Setting in REC mode] [Special Mic. Directivity Adjust] (

160

to the Fn Buttons

)

Reduction of Wind Noise

This reduces wind noise when an external microphone is connected.

[MENU/SET] [ ] [ ] Select [Wind Cut]
Settings: [HIGH] / [STANDARD] / [LOW] / [OFF]

●

While the external microphone is connected, [

] is displayed on the screen.

●

When an external microphone is connected, [Sound Rec Level Disp.] automatically turns [ON], and the recording level is
displayed on the screen.

●

When the external microphone is attached, do not carry the camera by holding the external microphone. It may become
detached.

●

If noises are recorded when using the AC adaptor, use the battery.

●

Setting [Wind Cut] may alter the usual sound quality.

●

For details, refer to the operating instructions for the external microphone.

Summary of Contents for DC-BS1H

















































































































































































































































































































Search results

Summary of Contents for DC-BS1H

Reviews:

Related manuals for DC-BS1H

Brands by name

Popular brands

Panasonic DC-BS1H, Operating Instructions Manual

Search results

Summary of Contents for DC-BS1H

Reviews:

Related manuals for DC-BS1H

Brands by name

Popular brands