background image

Smooth Operator Configuration Note (77200)

 

Panasonic DBS

 

C o n f i d e n t i a l                  

P a g e   2

 

The above information is provided by Octel Communications Corporation as a guide. 

  See disclaimer on page 1 

O c t e l   C o m m u n i c a t i o n s  

2.0  SMOOTH OPERATOR ORDERING INFORMATION 

There are many options available for both kit and turnkey versions of this 
product, depending on the application.  Please consult with your sales 
representative. 
 

3.0 

PBX HARDWARE REQUIREMENTS 

This note is compatible with the complete Panasonic DBS line. 

ƒ

  Analog Station card VB43621A for Rev 6.0 with CPC A2.  

Provides 8 ports per card and Positive disconnect. 

ƒ

  Analog Station card VB43621 for Revisions prior to 6.0 with 

CPCB.  Provides 8 ports per card and Busy tone for disconnect. 

ƒ

  DTMF Receiver card - MFR VB-43431, additional equipment may 

be required based on system configuration.  Refer to PBX 
installation requirements when ordering receiver cards. 

ƒ

  Ring Generator - SLT ringer box VB-2089P 

ƒ

  Call processor card CPC-A VB-43410, Call processor card CPC-B 

VB-43411, Call processor card CPC-AII VB-43412, or Call 
processor card CPC-S VB-42050, Call processor card CPC-M Call 
processor card CPC-EX. 

ƒ

  VB-43709 Single Line Telephone Adapter,  may be used when 

multiple analog station are not available 

3.1 

PBX SOFTWARE REQUIREMENTS 

ƒ

  CPC-EX Version 1.0 and Version 2.0 

ƒ

  CPC-S/M, Version 1.1 and Version 2.0  

ƒ

  CPC-A Version 3.31 

ƒ

  CPC-B and CPC-AII, Version 6.0, Version 6.03, Version 6.1, 

Version 7.0, Version 7.1, Version 8.0, and Version 9.0. 

4.0 SUPPORTED 

FEATURES 

[

9

] Items are supported 

System Forward to Personal Greeting 

 

Message Waiting

 2

 

 

 

All Calls

 

[

9

 

LCD Display

 

  

 

Ring/no answer

 

[

9

 

LED

 2

 

[

9

 

Busy

 

[

9

 

Stutter Dial Tone

 

[

9

 

Busy/No Answer

 

[

9

 

Voice Mail Key

 2, 3

 

[

9

 

Do Not Disturb 

  

Multiple Return to Operator 

[

9

Station Forward to Personal Greeting 

 

Direct Call

 3, 4

 

[

9

 

All Calls

 

[

9

Auto Attendant 

[

9

 

Ring/no answer

 

  

Outcalling

 2

 

[

9

 

Busy

 

  

Personal Greeting of Original-Called Party 

 

 

Busy/No Answer

 

[

9

]   

Multiple Call Forward 

[

9

 

Do Not Disturb

 1

 

[

9

]   

Double Call Forward 

  

Flexible Forwarding 

 

  Call 

Coverage 

  

 

Forward to No Answer Greeting

 

  

Intercom Paging 

  

 

Forward to Busy Greeting

 

  

Supervised Transfers

 5

 

 

 

Intercom/CO Forwarding

 

  

]  

Call Screening

 5

 

[

9

PBX hardware requirements 

PBX software requirements 

Supported integration features 

Summary of Contents for DBS


















Reviews: