Smooth Operator Configuration Note (77200)
Panasonic DBS
C o n f i d e n t i a l
P a g e
1 7
The above information is provided by Octel Communications Corporation as a guide.
See disclaimer on page 1
O c t e l C o m m u n i c a t i o n s
• If a valid key (CO key or second DSS key, for example) is pressed, the
VM/TRF is cancelled and the operation invoked by the key is performed.
• If an invalid key (REDIAL, for example) is pressed, the VM/TRF is
cancelled, and the user receives busy tone.
Number of digits allowed.
Once VM/TRF is pressed, the user can dial up
to 10 digits before completing the transfer.
Holding calls.
If a user begins to perform the Smooth Operator transfer
and the extension cannot hold a call (one call is already on non-appearance
hold, for example), the system will keep the call in the talk state and will
not allow the Smooth Operator transfer to be initiated.
Non-transmission.
If the VM/TRF key stores a number other than a
Smooth Operator extension number, the system does not send DSS/BLF
information or the extension number that is dialed after pressing VM/TRF.
© Copyright 1995 to 1998 Lucent Technologies. All rights reserved.
Printed in the United States
Panasonic is a registered trademark Panasonic Telecommunication
*Trademark of Panasonic Telecommunication Systems Company Business Telephone Systems.
All other products or services mentioned are the trademarks, service marks, registered
trademarks, or registered service marks of their respective owners.
LUCENT TECHNOLOGIES
OCTEL MESSAGING DIVISION
1001 Murphy Ranch Road
Milpitas, CA 95035-7912
(408) 321-2000
(CFN 77200)
