Panasonic DA-FS700 Operating Instructions Manual Download Page 51

Page: 51 / 271

2-4 Changing the Paper Tray Size

Loading Paper

Press Settings/Meter Check on the control panel.

Select Tools Mode.

Enter the Access Number of the System Administrator by using
the keypad and select Confirm.
Each input digit is represented by an asterisk.

Select Paper Tray Attributes.

Select Paper Sizes.

If you made a mistake while entering
the Access Number, press the Clear
C button to clear and re-enter.
The factory default Access Number
is "11111".

Changing the Access Number of the
administrator in

6-3: Configuring the

Machine with Tools Mode

for

information on how to change the
Access Number.

The screen on the right has the
Auditron mode enabled. For details,
refer to

Chapter 9 Using the Auditron

Feature

For models with the printer feature,
the screen displayed differs.

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands