Panasonic DA-FS700 Operating Instructions Manual Download Page 46

Page: 46 / 271

2-3 Loading Paper

Loading Paper

Loading Paper in Tray 6 (High Capacity Feeder) (optional)

Tray 6 (High Capacity Feeder) is
optional.
The capacity of Tray 6 (High
Capacity Feeder) (optional) is 3600
sheets.

Do not load paper above the MAX fill
line.

Load paper in Tray 6 (High Capacity Feeder) (optional) by following the
procedures below.

Procedure

Pull the tray out slowly until
it stops.

When pulling out a
paper tray, do it
slowly. If pulled out
with too much force,
the tray can hit and
injure your knees.

Align and load the paper
against the right side of the
tray with the side where
the image is to be copied
facing upwards.

Push the tray in slowly until
it stops.

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands