Panasonic DA-FS700 Operating Instructions Manual Download Page 156

Page: 156 / 271

5-21 Job Memory Operations

134

Added Features

Select Stored Jobs (Store/Delete).

The jobs currently stored are displayed.

Select Delete Job. Then select a job number from 1-8 to
delete.

For example, select 3.

Select Yes.

Select Close until the default screen is displayed.

The screen on the right is when the
Auditron feature is enabled. See

Chapter 9 Using the Auditron
Feature

for details.

On models with the printer feature,
the screen on the right differs.
Select Store/Modify to display
Stored Jobs (Store/Delete) screen.

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands