Panasonic DA-FS700 Operating Instructions Manual Download Page 153

Page: 153 / 271

5-21 Job Memory Operations

131

Added Features

Using the Settings/Meter Check button

Procedure

Press Settings/Meter Check.

Select Stored Jobs (Store/Delete).

The jobs currently stored are displayed.

Select a job number from 1-8 to store or modify.

For example, select 5.

Use the Basic Features screen, Customized Features screen
and Features Menu screen to select the features that you wish
to save in Stored Jobs.

Chapter 4 Basic Features

and

Chapter 5 Added Features

for

details.

The screen on the right is when the
Auditron feature is enabled. See

Chapter 9 Using the Auditron
Feature

for details.

On models with the printer feature,
the screen on the right differs.
Select Store/Modify to display
Stored Jobs (Store/Delete) screen.

Store/Modify Job can also be used
to change the settings of a
registered job.

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands