Panasonic DA-FS700 Operating Instructions Manual Download Page 24

Page: 24 / 271

1-1 Main Components and Their Functions

Getting to Know Your Copier

Main Components and
Their Functions

Main Components

Automatically feeds a stack of documents, one sheet at a time, for

scanning. For copying a two-sided document, side one is scanned first

and the document is flipped in the DADF for side two to be scanned. The

DADF serves as the document cover when the document to be copied is

placed on the document glass.

Receives copies made from the machine. If the optional offset catch tray

is installed, each copy set is offset from the previous copy set. This

means that the edge of each set is placed to the left or right of the

previous copy set to allow easy separation.

Open this cover to clear paper jams.

Load paper stock in these trays.

Open this door to clear paper jams or replace the Drum/Toner Cartridge.

Contains operating buttons, indicator lights and the touch panel display.

Document Glass

Switches On/Off the power of the machine.

Top Cover of Tray 6 (High Capacity Feeder)

Control Panel

Front Door

Paper Trays 1 to 4

Output Tray (optional)

Power Switch

Duplex Automatic

Document Feeder (DADF)

Tray 6 (High Capacity Feeder) (optional)

Lower Right Cover

Up to 3600 sheets of paper can be loaded.

Set originals here.

Open this cover to clear paper jams.

Load special media and non standard size paper here.

Tray 5 (Bypass)

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands