Panasonic DA-FS700 Operating Instructions Manual Download Page 137

Page: 137 / 271

5-16 Repeating an Image (Repeat Image)

115

Added Features

Select On.

Use the buttons to select the number of image repetitions
from 1-6 for the length and width of the paper.

For example, select 2 for repetitions on both short and long edges.

Load the document on the Document Glass.

Load in the document with the orientation of Head to Top, or Head to Left.

Select the corresponding document orientation of the original
loaded, and select Save.

Select Head to Top or Head to Left.

Select Cancel to cancel the settings.

3-2:

Loading Documents on how to

load documents.

5-10: Selecting the Original
Orientation (Original Orientation) for
details.

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands