Panasonic DA-FS700 Operating Instructions Manual Download Page 115

Page: 115 / 271

5-7 Setting the Margins (Image Shift)

Added Features

The factory default is No Shift.
Select Cancel to cancel the settings.

The screen on the right has the
Finisher installed.

Procedure

Select Features Menu. Then select Image Shift.

Select Side 1.

Select the position to shift the document to.

For example, set a left margin of 10 mm Set button (Right) at 10 mm.

• Corner Shift: Select .
• Auto Center (Centre): Select Auto Center (Centre).
• Margin: Use

buttons to set up, down, left, or right

margin between 0 - 432 mm.

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands