Panasonic DA-FS700 Operating Instructions Manual Download Page 133

Page: 133 / 271

5-14 Creating Negative-Like Images (Negative Image)

111

Added Features

Check that On is selected.

Confirm the settings, and select Save.

Select other features if necessary.

Enter the required number of sets by using the keypad and
press Start.

Copies in the form of negative images of the document are made by reversing

its black and white regions or brightness.

Some features cannot be selected
together with this feature. See

Appendix B: Possible Combinations
of Features

for details.

Select Cancel or Off to cancel the
settings.

Summary of Contents for DA-FS700
















































































































































































































































































Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands

Panasonic DA-FS700, Operating Instructions Manual

Search results

Summary of Contents for DA-FS700

Reviews:

Related manuals for DA-FS700

Brands by name

Popular brands