Panasonic CF-W2 Series Reference Manual Download Page 14

Page: 14 / 213

Using the Touch Pad

Using the Virtual Scrolling Function

Set the Virtual Scrolling function using the following procedure. The Touch Pad utility will be
disabled.

Click on the

icon on the notification area, and click [Settings].

If the

icon is not displayed on the notification area:

Click [start] - [All Programs] - [Panasonic] - [Touch Pad utility settings].

Remove a check mark from [Use Touch Pad function] in [General set-
tings], and then click [OK].

The

icon on the notification area will change to the

icon.

Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Mouse] - [Device Settings].

Click the device name in [Devices] (e.g., Synaptics TouchPad), then
click [Settings].

Click [Virtual Scrolling], add a check mark for the scroll functions you
want to use, then click [OK].

Summary of Contents for CF-W2 Series






















































































































































































































Search results

Summary of Contents for CF-W2 Series

Reviews:

Related manuals for CF-W2 Series

Brands by name

Popular brands

Panasonic CF-W2 Series, Reference Manual

Search results

Summary of Contents for CF-W2 Series

Reviews:

Related manuals for CF-W2 Series

Brands by name

Popular brands