44
RAM Module
Inserting additional RAM modules and increasing memory will enable you to run Windows
and application software more easily, and to increase overall operating efficiency.
Use a RAM module meeting the RAM module specifications below. If a module is used
that does not meet the specifications, there are cases in which data may become unusable
or the computer may not operate properly. We recommend using the optional RAM module
(
“Specifications”).
CAUTION
●
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such
modules. When inserting or removing a RAM module, do not touch the terminals or
internal components, insert objects other than the module, or allow foreign particles
to enter. Doing so has been known to cause damage, fire or electric shock.
CAUTION
●
If the RAM module is difficult to insert or difficult to press down, do not force it.
Check once more to ensure that the module is positioned correctly.
1
Power off your computer.
(
“Starting Up/Shutting Down”)
Do not shut down using the standby or hibernation function.
Disconnect the AC adaptor and remove the battery pack.
2
Turn the computer over and remove the cover (B) after removing
the screw (A) holding it in place.
3
●
Inserting the RAM module
1
Match the notch (E) in the RAM module (C) with the protrusion at the edge of
the slot (D), and insert the module diagonally. Insert it firmly until the gold
colored terminals are no longer visible.
2
Press the module down until the right and left hooks lock into place.
●
Removing the RAM module
1
Gently open the left and right hooks (F).
2
Gently remove the RAM module from the slot.
4
Put the cover back in place.
1
Insert the cover diagonally, then fit it in place.
2
Fasten the screw.
NOTE
●
Whether the RAM module is properly recognized or not can be confirmed in
[Information] menu of the Setup Utility (
page 55
). If the RAM module is not
recognized, power off the computer and insert it again.
RAM module specifications
144 pins, Micro DIMM, SDRAM, PC133 Compliant
Inserting/Removing RAM Module
