![background image](http://html.mh-extra.com/html/panasonic/cf-d1-series/cf-d1-series_operating-instructions-manual_264353005.webp)
5
Getting Started
Models for U.S.A.
Federal Communications Commission Radio Fre-
quency Interference Statement
Note: This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct
the interference by one or more of the following mea-
sures:
l
Reorient or relocate the receiving antenna.
l
Increase the separation between the equipment and
receiver.
l
Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
l
Consult the Panasonic Service Center or an experi-
enced radio/TV technician for help.
Warning
To assure continued compliance, use only shielded inter-
face cables when connecting to a computer or peripheral.
Also, any changes or modifications not expressly ap
-
proved by the party responsible for compliance could void
the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
l
This equipment is provided with PC Card slot that
could be used with wireless transmitters, which will be
specifically recommended when they become avail
-
able.
Other third-party wireless transmitters have not been
RF exposure evaluated for use with this computer and
may not comply with FCC RF exposure requirements.
<Only for model with wireless LAN/Bluetooth>
l
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
l
This equipment has been approved for portable op-
eration, and does not require any minimum spacing
be provided between antennas and all person’s body.
l
This equipment may not be co-located or operated
with any other antenna or transmitter.
25-M-4
<Optional Car Mounter / Port Replicator>
l
This equipment is provided with external antenna
connector(s) for connection to optional Car Mounter
or Port Replicator for mobile external mounted
antenna(s).
External antenna(s) must be professionally installed
and cannot exceed recommended maximum antenna
gain as described in individual provided supplement
instructions for wireless transmitters.
For WLAN, the Car Mounter should be used
with Radiall/ Larsen WLAN whip antenna, type
NMO5E2400BKTNC with 5 dBi antenna gain or less.
Also, user must maintain minimum 20 cm spacing
between external antenna(s) and all person’s body
(excluding extremities of hands, wrist and feet) during
wireless modes of operation.
25-M-1
<Only for model with wireless LAN>
This product is restricted to indoor use due to its opera-
tion in the 5.15 to 5.25 GHz frequency range.
FCC requires this product to be used indoors for the
frequency range 5.15 to 5.25 GHz to reduce the potential
for harmful interference to co-channel Mobile Satellite
systems. High power radars are allocated as primary us-
ers of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interference with and/or
damage this product.
25-M-W-1
Responsible Party: Panasonic Corporation of North
America One Panasonic Way
Secaucus, NJ 07094
Tel No:1-800-LAPTOP5 (1-800-527-8675)
6-M-1
FCC RF Exposure Warning:
This equipment is provided with external antenna
connector(s) for connection to optional Car Mounter or
Port Replicator for mobile external mounted antenna(s).
External antenna(s) must be professionally installed
and cannot exceed recommended maximum antenna
gain as described in individual provided supplement
instructions for wireless transmitters. The Car Mounter
is provided with Radiall/Larsen WLAN whip antenna,
type NMO5E2400BKTNC with 5 dBi antenna gain. The
maximum allowable antenna gain for the external WWAN
base whip antenna for the cellular band is 7.1 dBi and
PCS band is 2.5 dBi. Also, user must maintain minimum
20 cm spacing between external antenna(s) and all per-
son’s body (excluding extremities of hands, wrist and
feet) during wireless modes of operation.
32-M-1
USA Only: Disposal may be regulated in your commu-
nity due to environmental considerations. For disposal
or recycling information, please visit Panasonic web site:
http://www.panasonic.com/environmental or call 1-888-
769-0149
65-M-2
Models for Canada
Canadian ICES-003
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
7-M-2
<Only for model with wireless LAN/Bluetooth/GPS>
Industry Canada
This product complies with RSS210 Industry Canada.
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.
<Ne s’applique qu’aux modèles avec technologie Blue-
tooth/LAN sans fil/WAN sans fil>
Industrie Canada
Cet équipement est conforme à la norme CNR-210 d’In-