Panasonic BMET200 - IRIS RECOGNITION Operating Instructions Manual Download

Page: 79 / 86

Code

Details

Remarks

1-19

Recognition Method was updated.

Saved when the Recognition Method was updated.

1-20

PIN was deleted.

Saved when the PIN was deleted.

1-21

The Reader was started.

Saved when the reader was started.

A-01,
A-07
A-16,
A-19

A reader part may have failed.

When the same alarm occurs even after supplying the power to the
iris reader again, contact the dealer with this error code.

A-08

The reader may be disconnected from the
Access Control Panel.

Check if the power is supplied to the access control panel and the
iris reader and access control panel is properly connected.

A-09

The reader may be disconnected from the Card
Reader.

Check if the power is supplied to the card reader and the iris read-
er and card reader is properly connected.

A-10

An unauthorized person may have accessed
the reader unit.

An unauthorized person may have accessed the iris reader.

A-11

An unauthorized person may have accessed
the reader unit.

A person may have accessed the iris reader with an improper item
instead of the person’s iris.

A-12

The reader unit may have been removed or the
cover may be open.

Check if the iris reader is installed properly and if the cover is open.

A-13

The reader tamper-detection function has been
disabled.

Check if the iris reader is installed properly and if the cover is open.

A-14

The reader clock may have failed.

When the same alarm occurs even after supplying the power to the
iris reader again, contact the dealer with this error code.

A-15

An Option Board is Not Installed in the Iris
Reader.

Check if the interface board is installed inside the iris reader.

A-17

Error in Card Reader settings.

Check the settings of iris reader and card reader.

A-18

Error in Access Control Panel settings.

Check the settings of iris reader and access control panel.

A-20

Software download may failed.

Software download may have failed. Retry downloading software.

Summary of Contents for BMET200 - IRIS RECOGNITION























































































Search results

Summary of Contents for BMET200 - IRIS RECOGNITION

Reviews:

Related manuals for BMET200 - IRIS RECOGNITION

Brands by name

Popular brands

Panasonic BMET200 - IRIS RECOGNITION, Operating Instructions Manual

Search results

Summary of Contents for BMET200 - IRIS RECOGNITION

Reviews:

Related manuals for BMET200 - IRIS RECOGNITION

Brands by name

Popular brands