55
●
Register the PIN
The following is how to register the PIN of user who has been already registered in the database.
Press [+] [1] [1] [enter].
The short electronic sound "PiPi" is heard.
Enter the ID (2-digit) of a user to register the PIN.
Example:
When the ID is 01, press [0] [1] [enter].
The short electronic sound "PiPi" is heard.
Note:
When the voice guidance says, "Registration has been failed.", the iris reader will
return to the status before operation.
Enter the PIN (4-digit).
Example:
When the PIN is 1234, press [1] [2] [3] [4] [enter].
The short electronic sound "PiPi" is heard.
Note:
When the voice guidance says, "Registration has been failed.", the iris reader will
return to the status before operation.
Enter the PIN (4-digit) again.
Example:
When the PIN is 1234, press [1] [2] [3] [4] [enter].
The voice guidance will say, “Registration has been completed.”
Notes:
• When you register the PIN of another user, repeat Step 2 to 4.
• When the voice guidance says, "Registration has been failed.", retry Step 2.
When finishing operation, press [.] [enter].
If no operation has been performed for 30 seconds or more, the voice guidance will
say, "Registration has been failed.", and the iris reader will return to the recognition
mode.
1
2
3
4
5
No.
Procedure
accept
reject
accept
reject
accept
reject
accept
reject
accept
reject
accept
reject
accept
reject
accept
reject
Summary of Contents for BMET200 - IRIS RECOGNITION
Page 85: ...85 ...
