Panasonic BL-C10 Operating Instructions Manual Download Page 81

Page: 81 / 110

Operating Instructions

3.1.6

Resetting the Camera to Factory Default

All camera settings are reset to factory default directly after the Execute button is
clicked.

Click [Reset to Factory Default] on the Maintenance page.

Click [Execute].

•

The indicator blinks orange, and then turns off for 10 seconds.

•

All camera settings (user name, password, IP address, subnet mask etc.)
are reset to factory default.

•

If the camera is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure the camera seeing the Getting
Started.

Notes

•

The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 36). Set it again.

•

See page 85—page 92 for default settings.

•

Pressing the FACTORY DEFAULT RESET button resets the camera to the
factory default (see page 84).

•

All buffered images are deleted when resetting the camera to factory
default.

•

The reset operation takes about 1 minute.

•

Do not turn off the camera during the reset operation.

Summary of Contents for BL-C10















































































































Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands

Panasonic BL-C10, Operating Instructions Manual

Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands