Panasonic BL-C10 Operating Instructions Manual Download Page 4

Page: 4 / 110

Operating Instructions

System Requirements for your PC

Your PC (Personal Computer) and network must meet the following technical
specifications for the camera to work properly.

Note

See Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest
information about web browser.

Trademarks

•

Adobe and Acrobat are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.

•

Ethernet is either a registered trademark or a trademark of Xerox Corporation
in the United States and/or other countries.

•

Microsoft, Windows, Hotmail and ActiveX are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.

•

Pentium is a trademark or registered trademark of Intel Corporation or its
subsidiaries in the United States and other countries.

•

Screen shots reprinted with permission from Microsoft Corporation.

•

All other trademarks identified herein are the property of their respective
owners.

Abbreviations

•

UPnP is the abbreviation for Universal Plug and Play.

•

"Network Camera" is called "Camera" in this Operating Instructions.

Item

Description

Operating

System

Microsoft

Windows

XP, Microsoft

Windows

2000

Microsoft

Windows

Me, Microsoft

Windows

98SE

CPU

Pentium

III (500 MHz or greater is recommended.)

Protocol

TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)

Interface

10/100 Mbps network interface installed

Web Browser

Internet Explorer 6.0 or later (Not included on the Setup CD-
ROM)

Summary of Contents for BL-C10















































































































Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands

Panasonic BL-C10, Operating Instructions Manual

Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands