Panasonic BL-C10 Operating Instructions Manual Download Page 20

Page: 20 / 110

Operating Instructions

Changing or Deleting the Settings

Click [Program].

•

[Program] switches to [Cancel].
Click [Cancel] to quit without saving
changes.

Pan and tilt the camera to a desired
position.

Click the home position, sensor position
or a preset button (1—8).

Click [Save] after setting the preset
name or click [Delete].

•

"Success!" is displayed.

•

Clicking [Back] takes you back to the
previous page.

Click [Back].

•

The bar switches to the operation
bar.

Note

The home position or the sensor position
cannot be deleted, and these position
names cannot be changed either.

Pan/Tilt

Changing
the name

Preset

Preset
number

The deleted
button turns
white.

Sensor
Position

Home
Position

Summary of Contents for BL-C10















































































































Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands

Panasonic BL-C10, Operating Instructions Manual

Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands