Panasonic BL-C10 Operating Instructions Manual Download Page 53

Page: 53 / 110

Operating Instructions

2.12 Buffering or Transferring Images by Timer

The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.

Click [Buffer/Transfer] on the Setup page.

Click [No.] to enable buffer/transfer.

Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click
[Next>].

•

Click [Delete Buffered Images] to delete this buffered images.

•

Click [Save] to save the settings. The buffered images are deleted.

•

Clicking [Cancel] takes you back to the Image Buffer/Transfer page without
saving changes.

Setting

Description

Enable Image
Buffer/Transfer

•

Check the box to enable the buffer/transfer. Clear the box
to disable it.

Trigger

•

Selecting [Timer] enables the camera to buffer/transfer the
image by timer.

•

Selecting [Sensor] enables the camera to buffer/transfer
the image by sensor.

Summary of Contents for BL-C10















































































































Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands

Panasonic BL-C10, Operating Instructions Manual

Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands