Panasonic BL-C10 Operating Instructions Manual Download Page 72

Page: 72 / 110

Operating Instructions

2.15 Changing Indicator Display

The Indicator Control page allows you to select Indicator operation. Indicator has
four options.
•

Always on

•

Turn the indicator on when the camera is accessed.

•

Turn the indicator on during sensor reaction.
If the sensor detects temperature changes, the indicator lights orange despite
the image buffer/transfer feature. You can recognize the sensor detection
range while seeing the indicator.

•

Always off

Click [Indicator Control] on the Setup page.

Select indicator option.

•

Clicking [Cancel] cancels your settings without saving changes.

Notes

•

See page 7 in the Installation/Troubleshooting for indicator display.

•

Selecting [Never turn indicator on] keeps indicator always off.

Click [Save] when finished.

•

New settings are saved.

•

When finished, "Success!" is displayed.

Click [Go to Indicator Control page].

•

The Indicator Control page is displayed.

Summary of Contents for BL-C10















































































































Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands

Panasonic BL-C10, Operating Instructions Manual

Search results

Summary of Contents for BL-C10

Reviews:

Related manuals for BL-C10

Brands by name

Popular brands