Panasonic BB-HNP17A, Operating Instructions Manual

Page: 101 / 192

2.8 Playing back saved recording data on another
computer
•
This function is installed in Ver. 4.05 or a later version of this program.
(If your current version is older, you can use this function by updating to Ver. 4.05 or later versions of this
program.)
•
One hard disk drive connected by USB is required as the save file destination.
•
Although the steps of changing computers are the same as previously explained, please do not select the
same folder as your save file destination for PC-A and PC-B this time.
•
Also, please only use the hard disk to playback images on PC-B, and not to add any new images to the
hard disk.
Diagram
Prepare two computers with Ver. 4.05 or later of this program installed.
A license for this program is required for both computers.
PC-A: Computer used for recording images
PC-B: Computer used for playing back images
Save file destination of PC-A: Use an external USB hard disk, assigned to the E drive (E:\ncrdata)
Save file destination of PC-B: Use an external USB hard disk, assigned to the E drive (E:\ncrdata)
Camera
PC-B
C drive
BB-HNP17
E drive
Save to HDD
PC-A
C drive
BB-HNP17
E drive
Save to HDD
Operating procedure of PC-A
1.
Record using PC-A
* Recordings will be saved to the save file destination hard disk
2.
Close this program (
®
Page 10)
3.
Disconnect the save file destination hard disk of PC-A and connect it to PC-B
Operating procedure of PC-B
1.
Start up this program
Operating Instructions 101
2.8 Playing back saved recording data on another computer