Panasonic BB-HCS301A - Network Camera Server Operating Instructions Manual Download | Manualshive

Page: 3 / 172

background image

Operating Instructions

[For assistance, please call: 1-800-272-7033]

3

Digital Zoom Feature

*1

This product has a 10× digital zoom feature.

This feature allows you to increase or decrease the size of the object on the Single
Camera screen, the Multi Camera screen, and the Buffered Image screen.
Therefore, it will be easy to view the object that located to a distant place.

*2

A mouse

wheel operation or clicking the right mouse button increases or decreases the size
of the object on the Single Camera screen.

Motion Detection Feature

This product has a motion detection feature that detects movement, such as
people, based on the preset threshold and sensitivity on the image.

This product can buffer the images, transfer them to an FTP server or send them
by E-mails using the motion detection function as a trigger.

Multi-Camera Supported

Multi-Camera page displays up to 4 cameras while supporting each audio 2-way
communication. This product can switch 3 sets of 4 cameras. Additionally, this
product can displays maximum 12 cameras on a page in a static image.

DynamicDNS Service Supported

DynamicDNS service allows you to access this product over the Internet with your
favorite domain name (e.g. bob.viewnetcam.com) instead of a global IP address.

Multi-Language Display

Top page, Single Camera and Multi-Camera page can be displayed in English,
French, German, Italian, Spanish, Russian, Simplified Chinese or Japanese. The
Setup, Maintenance and Support pages are displayed only in English or Japanese.

Alarm Log and Alarm Log Notification

This product notifies the signal detection log once a day by E-mail sent at a
specified time. This product can have 3 E-mail destinations. It is convenient when
this product has multiple detections such as comings and goings of people.

SD Memory Card

*3

Recording

This product has an SD memory card slot. You can record images to the SD
memory card. If you enable alarm buffer/transfer, you can record the image at the
timing of signal detection of door sensor or light. About 60,000 images (320 × 240
resolution and standard quality) can be recorded to 1 GB SD memory card. If you
enable 1-minute interval timer buffer/transfer, you can record the images for about
41 days.

*1

This feature is not available when viewing on a cell phone.

*2

As the magnification increases, the image quality decreases.

*3

SD memory card is sold separately. This product supports 1 GB, 512 MB, 256 MB, 128 MB or
64 MB Panasonic SD memory card.

«
1
2
3
4
5
...
»

Summary of Contents for BB-HCS301A - Network Camera Server













































































































































































Reviews:

No comments

Related manuals for BB-HCS301A - Network Camera Server

nanoe CZ-CNEXU1

Brand: Panasonic Pages: 108

Brand: ZAPTEC Pages: 64

Brand: ZAPTEC Pages: 24

Brand: Waycon Pages: 8

Brand: Barco Pages: 2

Brand: X-pole Pages: 16

Brand: Harken Hoister Pages: 12

Brand: Xerox Pages: 2

NNC994S - Genius Prestige - Convection Microwave...

Brand: Panasonic Pages: 1

Brand: Honda Pages: 73

Brand: IAG Pages: 3

Dual Shock Rally Master

Brand: Trust Pages: 9

Brand: AutoWatch Pages: 4

Brand: SCORPION Pages: 12

Brand: TERSUS Pages: 27

Brand: Uebler Pages: 56

Brand: Vello Pages: 12

autoSteady AS101

Brand: Enduro Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands