Panasonic BB-HCS301A - Network Camera Server Operating Instructions Manual Download

Page: 31 / 172

Operating Instructions

[For assistance, please call: 1-800-272-7033]

1.6.1

Deleting Buffered Images

If you intend to delete images for each transfer condition, click [Delete Buffered
Images] on the Trigger page (see page 82, page 91 or page 102).

Notes

•

If you click [Save] on the Image Buffer/Transfer page, all buffered images on
the SD memory card are deleted.

•

If you are buffering images on the internal memory, the following operations
also delete all buffered images.
–

Turning off this product.

–

Saving the Date and Time page.

–

Restarting, updating firmware or resetting this product to factory default.

–

Changing the check box setting for [Enable Image Buffer/Transfer]. (See
page 82, page 91 or page 102)

Summary of Contents for BB-HCS301A - Network Camera Server













































































































































































Search results

Summary of Contents for BB-HCS301A - Network Camera Server

Reviews:

Related manuals for BB-HCS301A - Network Camera Server

Brands by name

Popular brands

Panasonic BB-HCS301A - Network Camera Server, Operating Instructions Manual

Search results

Summary of Contents for BB-HCS301A - Network Camera Server

Reviews:

Related manuals for BB-HCS301A - Network Camera Server

Brands by name

Popular brands