Panasonic BB-HCS301A - Network Camera Server Operating Instructions Manual Download Page 71

Page: 71 / 172

Operating Instructions

[For assistance, please call: 1-800-272-7033]

Click [Save] when finished.

•

New settings are saved.

•

When finished, "Success!" is displayed.

Click [Go to Audio page].

•

The Audio page is displayed.

PC Audio Input
Timeout

•

It controls the continuous receiving time of the microphone
audio from your PC.

•

The following settings are available.
1 min, 2 min, 3 min, 5 min, 10 min, 20 min, 30 min, 60 min

Input

•

It controls to enable or disable audio input to this product.
If Disable is selected, you cannot output the Local audio.

Sensitivity

•

It controls the audio sensitivity to input to this product.
–

Minimum: Decreased sensitivity

–

Standard: Standard setting (default)

–

Maximum: Enhanced sensitivity

When [Local Audio + Remote Audio] is selected on the Audio page, Local Audio
and Remote Audio are mixed and outputted from the audio output terminal. If they
are not balanced well, adjust the audio (see page 72).

Setting

Description

Summary of Contents for BB-HCS301A - Network Camera Server













































































































































































Search results

Summary of Contents for BB-HCS301A - Network Camera Server

Reviews:

Related manuals for BB-HCS301A - Network Camera Server

Brands by name

Popular brands

Panasonic BB-HCS301A - Network Camera Server, Operating Instructions Manual

Search results

Summary of Contents for BB-HCS301A - Network Camera Server

Reviews:

Related manuals for BB-HCS301A - Network Camera Server

Brands by name

Popular brands