29
23.
The selected area will have the message
"Unformatted".
24. In "Partition" on the menu bar, click "Commit
Changes Now...".
25. At the message "Do you want to save changes?",
click .
26. The message "Disks were updated successfully".
Click .
27. The message of the unformatted area of the disk
changes to "Unknown".
28. Click the "Unknown" area of the disk to select it.
29. In "Tools" on the menu bar, click "Format".
30. The format window opens. Click of "File system",
and select "NTFS".
31. Do not set the format option. No guarantee is made
for the operation if "Quick format" is selected for for-
matting. The regular formatting facility must be
used.
32. Click
. The warning display appears, but
click .
33. When the message "Format complete" appears, click
. Then, click
in the format window.
The format window will close.
34. On the menu bar (above the window) click "Delete"
in "Partition".
35. At the message "Confirm", select
.
36. The area will be indicated in crosshatch display.
37. Click the crosshatched area of the disk to select it.
38. On the menu bar (above the window) click "Create"
in "Partition".
Yes
Close
OK
OK
Start
OK
Yes
39. The screen message will prompt you for the size of
the partition to be created. Do not modify anything,
but just click
. When the confirmation mes-
sage is displayed, click
.The selected area will
have the message "Unformatted".
40. In "Partition" on the menu bar, click "Commit
Changes Now...".
41. At the message "Do you want to save changes?",
click .
42. The message "Disks were updated successfully".
Click .
43. The message of the unformatted area of the disk
changes to "Unknown".
44. Click the "Unknown" area of the disk to select it.
45. In "Tools" on the menu bar, click "Assign Drive
Letter... "Select"Assign drive letter" (selection indicat-
ed by ). Click to bring up the list of characters
that can be assigned. Select "0".
After selecting the character, click
.
46. The message "Do you wish to continue?" appears.
Click
. The drive character will change.
47. Set up the other hard disk according to the same
procedure. However, assign "P" for the driver char-
acter.
48. When setup is finished, click "Exit" in "Partition" on
the menu bar.
Note:
A hard disk for video use should be left in
"Unknown" status.
Yes
OK
OK
Yes
Yes
OK
Summary of Contents for AY-RP500
Page 57: ...55 ...