manualshive.com logo in svg

Panasonic AY-RP500, Installation Manual

Share
Download
Panasonic AY-RP500 Installation Manual Download Page 21

19

Note on I/O port settings:

Make sure that the following I/O ports do not

overlap so that the JOG board can perform 10-

bit address decoding.

• Generally speaking, 0240-024F and 0F40-0F4F are

often allocated to a Sound Blaster board.

4. Insert the JOG board into the ISA slot that is the far-

thest away from the CPU.  At this point, insert each
special cable securely into the LTC/REF connector
and the RS422-1 connector.  After positioning them,
secure the cover in place using the screws.

5. Store the screws and cover that were removed in a

safe place.

6. Turn on the power and start up Windows NT.

7. Install the driver for the JOG board.

The JOG board driver is included in the CD-ROM of
the software package.  Refer to the user's manual of
the software package for details on installation.
When the software package is installed, the driver
will be installed at the same time.  The setting
screens for the IRQ and I/O port will appear.  Select
the same values as the jumper pin settings.  When
installation ends, the Setup Complete window
appears.
Select "Yes, I want to restart my computer now".
(When this is selected,      is displayed.)  
Click 

.   The computer will restart.

8. When Windows NT has restarted, click 

.

From Programs in the Start Menu, click
"Administrative Tools" 

p

✂

Windows NT

Diagnostics". The program starts up.

Start

Finish

9. The Windows NT Diagnostics window appears.

Click the "Resources" label.  The resource list
appears.
(Refer to the diagram below)

10. Confirm that the AY-RP500 board (JOG board) IRQ ,

I/O port are the same number that was set with the
jumper.  "Jog" indicates the AY-RP500 board.

Note:

For the following cases, modify the jumper set-

tings for the JOG board's IRQ and the I/O port,

and reinstall the JOG driver:

•"Jog" display cannot be found in the release list.
•The JOGPAD and RS422 control functions do not

work with an application.

JOG board

Other devices

230H

✻

230-

✻

23F

✻

630-

✻

63F

✻

A30-

✻

A3F

✻

E30- 

✻

E3F

240H

✻

240-

✻

24F

✻

640-

✻

64F

✻

A40-

✻

A4F

✻

E40- 

✻

E4F

330H

✻

330-

✻

33F

✻

730-

✻

73F

✻

B30-

✻

B3F

✻

F30- 

✻

F3F

340H

✻

340-

✻

34F

✻

740-

✻

74F

✻

B40-

✻

B4F

✻

F40- 

✻

F4F

(

✻

: Number from 0 to F)

The Windows NT Diagnosis

Summary of Contents for AY-RP500

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands