17
6. Appear Configuration menu window.
Select "SCSI Device Configuration", and press
[Enter] key.
7. Appear Device configuration window.
In all SCSI ID (from #0 to #15) ,Change 40.0(from
20.0) at Maximum Sync Transfer Rate.
At Each SCSI ID ,move cursor to 20.0 and press
[Enter] key.
Appear all useable number, select 40.0 and press
[Enter] key.
Please change about all SCSI ID.
AHA-3940AU/AUW/AUWD at Bus:00h Device:0Eh Channel:A
Configuration
SCSI Bus Interface Definitions
Host Adapter SCSI ID ......................7
SCSI Parity Checking .......................Enabled
Host Adapter SCSI Termination .......Automatic
Additional Options
Boot Device Options ........................Press <Enter>
SCSI Device Configuration ..............Press <Enter>
Advanced Configuration Options .....Press <Enter>
<F6> - Reset to Host Adapter Defaults
SCSI Device Configuration
SCSI device ID
#0
#1
#2
#3
#4
#5
#6
#7
Initiate Sync Negotiation
yes
yes
yes
yes
yes
yes
yes
yes
Maximum Sync Transfer Rate
20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
Enable Disconnection
yes
yes
yes
yes
yes
yes
yes
yes
Initiate Wide Negotiation
yes
yes
yes
yes
yes
yes
yes
yes
Options Listed Below Have
NO EFFECT if the BIOS is Disabled
Send Start Unit Command
no
no
no
no
no
no
no
no
BIOS Multiple LUN support
no
no
no
no
no
no
no
no
Include in BIOS Scan
yes
yes
yes
yes
yes
yes
yes
yes
SCSI device ID
#8
#9
#10 #11 #12 #13 #14 #15
Initiate Sync Negotiation
yes
yes
yes
yes
yes
yes
yes
yes
Maximum Sync Transfer Rate
20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
Enable Disconnection
yes
yes
yes
yes
yes
yes
yes
yes
Initiate Wide Negotiation
yes
yes
yes
yes
yes
yes
yes
yes
Options Listed Below Have
NO EFFECT if the BIOS is Disabled
Send Start Unit Command
no
no
no
no
no
no
no
no
BIOS Multiple LUN support
no
no
no
no
no
no
no
no
Include in BIOS Scan
yes
yes
yes
yes
yes
yes
yes
yes
8. When finish to change about all SCSI ID, press
[ESC] key 2 times.
Appear confirmation message.
Select "Yes", and press [Enter] key.
Finish for channel A.
9. Press [ESC] key.
Select channel B and change same as channel A.
10. Finish setting for channel B(finish Item 8), press
[ESC] key 2 times.
Appear message of finish.
Select "Yes", and press [Enter] key.
11. Appear "Please press any key to reboot", press any
key.
Setting is finish and auto reboot.
Save Changes Made?
Yes
No
Exit Utility?
Yes
No
Summary of Contents for AY-RP500
Page 57: ...55 ...
