Panasonic AWE300SP - COLOR CAMERA, Operating Instructions Manual

Page: 82 / 97

32 (E)
ENGLISH
C Noise cancellation compensation level selection
[Noise Suppress: OFF, LOW or HIGH]
This is for reducing the amount of screen noise when HIGH or LOW has been selected
as the sharpness (detail)/super-hard level adjustment
B setting.
D Clean DNR selection [Clean DNR: OFF, LOW or HIGH]
This enables the clean DNR effect to be selected.
E Flesh tone detail level selection [DTL Flesh Tone: LOW, MID or HIGH]
LOW : The roughness of the flesh tones is suppressed.
MID : Standard setting
HIGH : The detail enhancement of the flesh tones is boosted.
F Electronic shutter speed selection
[Shutter Speed: OFF, 1/120 to 1/10000, synchro scan or auto ND]
OFF:
The electronic shutter is set to OFF.
1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
The electronic shutter is actuated at the respective shutter speed.
Synchro scan:
The electronic shutter is actuated at the shutter speed set by the electronic shutter
synchro scan setting
G .
Auto ND:
The light quantity is automatically adjusted by controlling the electronic shutter. (ELC)
<Notes>
O
The speed cannot be set to 1/250, 1/2000, 1/4000 or 1/10000 by operating the RCU
(RCB).
O
When the auto ND setting is selected under fluorescent lighting, the flicker may
increase.
O
When ON is selected as the auto ND (ELC) selection 4 setting on the “Brightness
Set” sub-menu, the electronic shutter is automatically set to “Auto ND.”
Menu Item Settings and Changes
(in halogen light mode, fluorescent light mode or outdoor mode)
IRIS
MAN
AUTO
1000
S/S
ELC
500
120
OFF
SHUTTER SCENE
2 1
3
USER
SET
OFF
ON
+18
+9
0(dB) +6
OFF
–6(dB)
GAIN
BAR
CAM
HIGH
LOW
OFF
RCB
DTL
AGC
R B
R B
PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
AUTO/ATW
PAINTING
GAIN
RCU (RCB)
Detail
enhancement
selector switch
(DTL)
B Sharpness (detail)/super-hard level
adjustment [Level: OFF, LOW or HIGH]
This enables the sharpness (detail) level to
be adjusted when “Sharpness” has been
selected for the sharpness (detail)/super
hard switching
A setting. When “Super-
hard” has been selected, it enables the
super-hard level to be adjusted. When
RCU (RCB) is used, adjustment is possible
using the detail enhancement selector
switch (DTL).