Panasonic AWE300SP - COLOR CAMERA, Operating Instructions Manual

Page: 86 / 97

36 (E)
ENGLISH
Menu Item Settings and Changes
(in user mode)
P Electronic shutter step selection [Step: OFF or 1/120 to 1/10000]
This can only be set when “Step” has been selected as the electronic shutter mode
selection
O setting.
OFF:
The electronic shutter is set to OFF.
1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000:
The electronic shutter is actuated at the respective shutter speed.
<Notes>
O
The speed cannot be set to 1/250, 1/2000, 1/4000 or 1/10000 by operating the RCU
(RCB).
O
ELC may not operate when the camera alone is used.
Similarly, it may not work when AUTO has been selected as the RCU (RCB) iris
switch setting.
O
When ELC is set under fluorescent lighting, the flicker may increase.
Q Electronic shutter synchro scan setting [Synchro Scan: 60.34 Hz to 15.75 kHz]
This can be set only when “Synchro scan” has been selected as the electronic shutter
mode selection
O setting.
The horizontal bar noise can be reduced by adjusting the synchro scan frequency when
shooting the screen of a work station, etc.
Refer to the table below for the light quantity that should be set at different shutter
speeds and synchro scan frequencies.
R CCD readout method selection [Field/Frame: Field, frame1 or frame2]
Field : Field storage is used as the CCD storage method.
Frame1 : Frame storage is used, and the vertical resolution is improved as a result.
Frame2 : Field storage and the electronic shutter are used, and the vertical resolution is
improved with no accompanying increase in the residual image as a result.
Shutter speed
Synchro scan
frequency
Light quantity
ratio required
OFF
==
1
1/120 120.2 Hz 2
1/250 250.0 Hz 4
1/500 492.2 Hz 8
1/1000 984.4 Hz 16
1/2000 1.969 kHz 32
1/4000 3.938 kHz 64
1/10000 7.875 kHz 160