38 (E)
ENGLISH
Menu Item Settings and Changes
(in user mode)
W
Highlight chroma selection [Highlight Chroma: OFF, LOW or HIGH]
When this is set to LOW or HIGH, the dynamic range of the colours is increased to
prevent whitening-out in very bright conditions.
X
Painting adjustment [Painting, R Gain, B Gain, R Pedestal, B Pedestal: –30 to +30]
R Gain, B Gain:
These enable the white balance after AWC to be finely adjusted when AWC A or
AWC B has been selected as the white balance selection
V
setting.
When the RCU (RCB) is to be used for the adjustments, its R (red) and B (blue) gain
controls are used.
If AWC is executed when using the camera by itself, the settings will return to ±0.
R Pedestal, B Pedestal:
These enable the black balance after ABC to be finely adjusted.
When the RCU (RCB) is to be used for the adjustments, its R (red) and B (blue)
pedestal controls are used.
If ABC is executed when using the camera by itself, the settings will return to ±0.
Y
2-dimensional low-pass filter selection [2D LPF: OFF, LOW or HIGH]
This is for setting the 2-dimensional low-pass filter which reduces moire and cross colour
(colour blur).
Z
Horizontal phase adjustment [H Phase: –206 to +49]
This enables the horizontal phase during genlock to be adjusted.
[
Colour phase adjustment [SC Coarse: 1, 2, 3 or 4]
This enables the colour phase during genlock to be coarsely adjusted.
\
Colour phase fine adjustment [SC Fine: –511 to +511]
This enables the colour phase during genlock to be finely adjusted.
^
Detail level selection [Detail: OFF, LOW or HIGH]
This enables the detail enhancement amount to be set.
The detail is enhanced at the levels set by the horizontal and vertical detail level
HIGH/LOW settings
_
.
R
B
R
B
PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
IRIS
MAN
AUTO
1000
S/S
ELC
500
100
OFF
SHUTTER
SCENE
2
1
3
USER
SET
AUTO/ATW
PAINTING
GAIN
RCU (RCB)
R and B gain controls
R and B pedestal controls
Summary of Contents for AWE300SP - COLOR CAMERA
Page 1: ...OPERATING INSTRUCTIONS ...
