23
Adjustments
$
Black balance adjustment
This adjustment is performed when using the camera for the first time, when the camera
has not been used for a prolonged period or when the lighting conditions have changed,
causing the white balance to change significantly which in turn has caused the black
balance to alter.
O
Close the lens before proceeding.
O
If the black balance is set when using the camera by itself, the setting for the R (red)
and B (blue) gain adjustment using Painting will return to ±0. (The Painting settings
are valid only in the user mode.)
The black balance is set in about 10
seconds when the YES/ABC switch is
held down for two or more seconds.
After the black balance has been set,
the black balance can be finely adjusted
by varying the R pedestal and B
pedestal using Painting on the color set
sub-menu in the user mode.
The black balance is set when the auto
set switch is set to “ABC.” The AUTO
LED flashes while the black balance is
being set.
The AUTO LED goes off to indicate a
successful completion of the setting, and
it lights to indicate a failed setting
procedure.
Repeat
the
setting
procedure in the latter case.
When performing the adjustment
using the RCU (RCB)
When performing the adjustment
using the camera
R
B
R
B
PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
AUTO/ATW
PAINTING
GAIN
RCU (RCB)
Auto set switch
AUTO LED
Camera
–
+
MENU
ITEM/AWC
YES/ABC
NO/BAR
OPTION CARD
VIDEO OUT
I/F REMOTE
G/L IN
IRIS
DC12V IN
YES/ABC switch
Summary of Contents for AWE300SP - COLOR CAMERA
Page 1: ...OPERATING INSTRUCTIONS ...
