manualshive.com logo in svg

Panasonic AW-UE80WP, Operating Instructions Manual

Share
Download
Panasonic AW-UE80WP Operating Instructions Manual Download Page 75

Error Status screen

     Error Status

 Lens                     No Error

 Pan/Tilt                 No Error

 Fan                      No Error

 Temperature              No Error

 

 

 

 

 Return

Lens [No Error, Error]

This displays the error status of the lens.

No Error

The lens is operating normally.

Error

A lens error has occurred.

Pan/Tilt [No Error, Error]

This displays the error status of the pan-tilt drive section.

No Error

The pan-tilt drive section is operating normally.

Error

A pan-tilt drive section error has occurred.

Fan [No Error, Error]

This displays the error status of the fan.

No Error

The fan is operating normally.

Error

A fan error has occurred.

Temperature [No Error, High Temperature, Sensor Error]

This displays the status of temperature related errors.

No Error

Within normal operating temperature range.

High 

Temperature

Temperature is high.

Sensor Error

The temperature sensor may have malfunctioned.

<NOTE>

• When the above errors occur, notification of the errors are sent via 

IP/serial to the external device (AW-RP150 or AW-RP60, etc.), so 

these errors can be displayed on the external device.

Return

Return to the previous menu level.

74

75

Camera menu items  (continued)

Summary of Contents for AW-UE80WP









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands